

- Lasenic? ABS
- Lasenic? PS
- Lasenic? PMMA
- Lasenic? HIPS
- Lasenic? PP
- Lasenic? CPVC
- Lasenic? ABS+PC30%
- Lasenic? PVC
- Lasenic? HDPE
- Benlonate? PC+ABS30%
- Benlonate? PET
- Benlonate? PC
- Qunsail? POM Acetal
- Semolar? UHMWPE
- Recalon? PA6/PA66
- Recalon? MC Nylon
- Sufoner? PPS
- Sufoner? PEEK
- Sufoner? PEI
- Sufoner? PSU
- Sufoner? PI
- Sufoner? PAI
- Turcite?X Rod
- Turcite?A Rod
Material Introduction
Lasenic® PP?Lasenic? PP Standard Sizes, Colors, Grades, Brands, Types
?Lasenic® PP looks like PE, but PP is more transparent, lighter. PP is flammable. PP own low water absorption, low gas permeability. PP has good mechanical properties, the tensile strength and yielding strength are better than PE, PS and ABS. PP resists stress cracking and easy to weld, but low notched impact strength, the finished parts shall avoid sharp corners and notches. The temperature ranges between +5℃ and 100℃.?Lasenic® PP Standard Sizes, Colors, Grades, Brands, Types
Lasenic® PP sheet | |
Thickness (mm) | Width × Length (mm) |
0.3--1.8mm(in roll) | W:600mm—1000mm,any length |
2mm-12mm | W:600mm x 1200mm |
15mm-100mm | 1000mm x 2000mm 1200mm x 2400mm |
110mm-200mm | W:600mm,any length |
?Lasenic® PP rod | |
Diameter (mm) | Length (mm) |
10mm—300mm | 1000mm—3000mm |
Colors include: Natural , Black, Other Colors
Types: Rods, sheets, tubes, profiles
Grades include:
PP (Flame Retardant), PP (UV Retardant), PP (Skin Texture, diamond texture )
Note.Remarks
1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.
-
Advantages:
♦ Low density
♦ Resistance to bending fatigue
♦ Good heat resistance
♦ High tensile strength
♦ High surface strength
♦ High chemical resistance
♦ Food safeDisadvantages:
♦ Low oxidation resistance
♦ Low abrasion resistance
♦ Easy to brittle at low temperature
♦ HF-welding not possible
♦ Difficult to varnish and glue
♦ No weather resistance